 |
|
New Age Industries Inc - OEM Medical Tubing Manufacturer, Industrial OEM Custom Hose Extrusion
|
| Private Ownership
|
145 James Way
Southampton, PA (USA) 18966
|
| |
|
| Phone: |
215.526.2300 |
| Fax: |
215.526.2190 |
| Toll Free: |
888 884 6977 |
| Company Description |
|
NewAge Industries manufactures flexible tubing and hose (plastic and rubber tubing and hose). custom OEM tubing extrusion, custom coiling, hot bond, heat formed shapes and fabrication services. |
|
|
|
| NewAge Industries is a manufacturer
and fabricator of flexible tubing and hose and a private-label reseller of
fittings and clamps. Large stock quantities of a wide variety of plastic
and rubber tubing, plastic and rubber hose, fittings, and clamps are
available for same day shipment. Materials that meet 3A, NSF, USP Class
VI, and other requirements include PVC, silicone, fluoropolymer, TPR
(thermoplastic rubber), latex, nylon, polypropylene, polyethylene, and
more. Rubber tubing and plastic hose styles are available in unreinforced
tubing, corrugated or convoluted tubing, and braid-reinforced hose for
extra strength and pressure capabilities.
NewAge Industries possesses the
capabilities and experience to create custom parts perfectly suited to
your application. Capabilities include custom extrusions, fabrications
(coiling, heat formed shapes, tubing and hose cut to specified lengths,
thermal tube bonding), and hose assemblies. |
CUSTOM EXTRUSIONS: In
addition to stock products, NewAge Industries also offers extensive
custom extrusion capabilities. Custom extrusions of varying profiles,
tight tolerances, custom reinforcement, colors, in-line cutting, and
special resin compounds can be created for your application. |
 |
Custom
Compounding permits designers
to "fine tune" a plastic material to meet special
performance requirements. Blending additives into the raw plastic
material can enhance specific areas of plastic performance. Custom
compounding adds value by providing a part specifically designed to
meet your need--a part that can last longer and work better in your
application, such as:
- Low Temperature Flexibility
- Improved Purity
- Resistance to Fungus Growth
- Improved Elasticity
- Resistance to Ozone Deterioration
- Anti-Static Properties
- Improved Dielectric Properties
- Improved Conductivity
- U.V. Stabilization
- Decrease of Tackiness
- Fuel and Oil Resistance from
Sterilizing Radiation
|
| CUSTOM COILING: The
flexibility to pull, twist, stretch, or bend a section of tubing is
often a must in many manufacturing processes. Coiled tubing can be the
solution. By taking flexible, semi-rigid, or rigid material and wrapping
it into a coil, extraordinary flexibility can be achieved. Coiled tubing
and hose is used in industries such as food and beverage, robotics,
laboratories, and as supply lines for air and various fluids. |
|
To help meet the ever-increasing number
of requests for coiled tubing, NewAge Industries recently acquired
additional equipment to quickly and easily produce custom coils of
nylon or polyurethane. Each material is permanently heat set into
retractable coils and retains excellent coil memory.
Standard coils of fluoropolymer are
also available with our COILTEF(TM)
line. Fluoropolymer Tubing may also be custom coiled to your required
needs.
|
| HOT BOND®
- THERMAL BONDING is a process
by which thermoplastic tubing or hose is bonded together using a
proprietary heat process into a neat ribbon, offering the uncommon
combination of reduced cost and improved aesthetics to your product. No
solvents, which could migrate and cause contamination of adjoining
surfaces or materials, are used in the bonding process. |
|
The blend of the HOT BOND process and
NewAge® Industries' vast tubing and hose inventory provides faster
delivery, at a lower cost, than a typical custom extrusion.
Prototyping is easy, and both long and short runs are equally cost
effective and welcome.
The HOT BOND® process can be applied
to either stock tubing or hose or to custom extrusions. NewAge®
Industries can HOT BOND reinforced hose to unreinforced tubing, half
inch to three quarter inch sizes, colored to clear; the choices are
nearly endless.
|
| HEAT FORMED SHAPES:
Fabricating tubing and hose into
special shapes opens a range of options for custom designed parts at a
reasonable cost. Formed shapes can be made to match your application
requirements. By using heat and special tooling in a controlled
environment, NewAge Industries can custom form thermoplastic tubing and
hose into a variety of configurations. Formed shapes can eliminate
problems such as kinking, and they often make installations easier. |
 |
Nearly unlimited shapes and designs are
possible by heat forming thermoplastic tubing and hose, so why not get
exactly what you need? The fixture needed to heat form your part may
already exist. Ask about it! Use elbows with twists, flared ends at
each end, even curves in bonded tubing and hose to exactly fit your
application. Even short, simple pieces with a single elbow can improve
your product. There's no loose tubing to get in the way. |
| FABRICATION SERVICES: What
really sets NewAge® Industries apart from other manufacturers is our
ability and willingness to offer various services to create a custom
part from stock material. This benefits you in two ways--fast delivery
and low cost. |
|
Printing
& Striping can tailor the
look of your company's product. We can provide permanently-printed
material with your logo, part number, size information, date code, or
other information that you specify. Printed products can reinforce and
enhance your company identity, create product traceability, or
identify capabilities or limitations of the item--all at a reasonable
cost.
Repetitive
Cutting can provide you with ten pieces that
are ten feet long or millions of pieces 1/8" long--whatever you
need. NewAge Industries can efficiently and cleanly cut the product to
your specifications.
|
OVERBRAIDING &
JACKETING: There are times when
applications require a more durable tubing or hose product than standard
reinforced or unreinforced stock material. Applications may present high
temperatures or pres-sures, excessive friction, attack by chemicals or
corrosives, kink or crush possibilities, or other parameters that need a
special hose. Perhaps you need to bundle multiple tubes of dissimilar
material, or require electrical conductivity or grounding, or simply
choose to improve the aesthetics of your product. |
 |
NewAge® Industries provides custom
overbraiding and/or jacketing, uniquely suited to meet your
application's requirements, offering a broad mix of materials at a
reasonable cost. Stainless steel overbraided PTFE (fluoropolymer)
hose, for instance, will handle up to 3000 psi working pressure*--more
than 20 times that of standard fluoropolymer tubing. Straight walled,
stainless steel overbraided PTFE hose conforms to SAE 100R14
standards. NewAge Industries offers straight walled material in sizes
ranging from 1/8" I.D. to 1-3/8" I.D. and convoluted
material in 1/4" I.D. to 2" I.D.
Stainless steel or fabric overbraiding
allows increased pressure capabilities for both reinforced hose and
unreinforced tubing. Multiple layers are also possible.
|
| HOSE ASSEMBLIES: The
final step in creating a functional hose is to assemble the components.
This basic fact, however, is often overlooked in the purchasing process,
causing delays and added expense. |
 |
NewAge® Industries' expert fabrication
team is prepared to assemble any mix of components into a finished
assembly. From an item as simple as Nylobrade® hose with a Thermobarb®
fitting and a hose clamp, to a custom overbraided PTFE hose with a
heat-shielding sleeve and a permanent, crimp-type fitting, we can
assure you that the job is done correctly and cost effectively. |
|
|
