 |
|
Lee Company - Miniature Solenoid Valve Manufacturer, Control Valves, Micro-Dispensing Valves
|
| Private Ownership
|
2 Pettipaug Rd
Westbrook, CT (USA) 06498
|
| |
|
| Phone: |
860.399.6281 |
| Fax: |
860.399.7058 |
| Company Description |
|
The Lee Company is a pioneer in miniature precision fluid control components. Miniature micro dispensing valves, control valves, inert solenoid valves and solenoid pumps are used in medical/scientific instumentation and many other applications. |
|
|
|
 |
For over 50 years, the Lee Company has
pioneered the development of miniature precision fluid control components
for aerospace, down-hole oil tools, machine tools, medical/scientific
instrumentation, and ink-jet printing. Lee's unique capabilities in
miniaturization and engineering expertise - one in every eight employees
is a graduate engineer - keep the company at the forefront of fluid flow
technology.
|
Miniature solenoid valves,
pumps, and inert fluid handling components for medical/scientific
instrumentation, ink-jet printing, and other high technology systems.
|
Micro Dispensing
Valves
INKA Series miniature solenoid valves have been designed
specifically for micro dispensing and ink jet applications. For more than
a decade, these valves have been the primary choice for manufacturers
requiring high speed operation and precision, repeatable dispensing of
liquids for ink jet printing equipment and other applications around the
world.
INKA Series solenoid valves offer the following features:
- Valves that set the world standard
- Genuine replacement valves for
your ink jet printer.
- Compatible with Water Base and
Solvent Base Fluids
- Suitable for time metered
micro-dispensing
- Superior valve to valve
consistancy
- Consistant performance for the
operating life
- High speed up to 1200 Hz
- Operating pressures up to 120 psig
in some models
- Low power consumption
- Response times as fast as 0.25
milliseconds
- Printed circuit board mount
versions available
|
 |
|
Control Valves
Lee Control Valves have been designed specifically for miniature
applications. For more than a decade, these valves have been the primary
choice for manufacturers requiring high speed operation and precision,
repeatable dispensing of liquids for ink jet printing equipment and other
applications around the world.
- Valves that set the world
standard
- Compatible with gasses and mild
liquids
- Suitable for time metered
micro-dispensing
- Superior valve to valve consistency
- Consistent performance for the
operating life
- High speed up to 200 Hz
- Operating pressures up to 30
psig in some models
- Low power consumption
- Response times as fast as 0.25
milliseconds
- Printed circuit board mount
versions available
|
|
|
Inert Solenoid
Valves
Our miniature inert solenoid valves have been designed
specifically for analytical, clinical and scientific instrument
applications. For more than fifteen years, our Y-valves and Micro Inert
Valves (MIVs) have been the standard for manufacturers requiring accurate,
precise, and reliable operation. These valves have been used on the best
instruments and devices by leading manufacturers and researchers around
the world. Our new R-valve continues this tradition of excellence with a
modular porting, small size and flexible configuration. Further details on
how our experience and expertise can help you with your needs and problems
are below.
Our Y-valves, MIVs and R-valves offer
the following features:
- Valves that set the world standard
- Wide range of materials for
maximum compatibility
- Suitable for time metered
micro-dispensing
- Superior valve to valve consistency
- Consistent performance for the
operating life
- Fast, consistent response times
- Operating pressures up to 60 psig
in some models
- Low power consumption
- Response times as fast as 2.5
milliseconds
- Manifold mount versions available
- Many combinations of internal
volumes and flow rates
- All backed by our world-wide
network of degreed Sales Engineers
- All backed by our state-of-the-art
manufacturing facility
- All backed by a fifty-year Lee
Company heritage of quality, precision and service.
|
 |
|
Variable Volume
and Pre-set Solenoid Pumps
Lee Pre-Set and Variable Volume Pumps are the solution for
automated chemistry systems. Designed for "install and forget"
operation with outstanding features and performance.
These high quality pumps are carefully
engineered and manufactured in a laboratory-like, clean production
environment. The result is a line of instrument-quality pumps that offer
unparalleled performance in terms of reliability and consistent operation
from cycle to cycle and pump to pump.
- Standard volume ranges: 50 µl,
250 µl, 750 µl per full stroke
- Full volume dispense as fast as .3
seconds for Pre-Set Pumps, 1 second for Variable Pumps
- Low Power Consumption means less
heat in the cabinet to manage
- Long Life -- Millions of cycles
- Compact -- Made small to fit
inside the machine, near the chemistries
- Light Weight -- Made light to fit
on moving arms, gantries, etc.
- Robust construction
- Many custom configurations
possible
- 100% inspected and function tested
|
|
|
MINSTAC
Miniature System of Tubing And Connectors
Our Miniature Inert System of Tubing And Connectors has
been designed specifically for analytical, clinical and scientific
instrument applications. For more than fifteen years, our Y-valves and
Micro Inert Valves (MIVs) connected with MINSTAC have been the standard
for manufacturers requiring accurate, precise, and reliable operation.
This combination has been used on the best instruments and devices by
leading manufacturers and researchers around the world. Our new 125
MINSTAC continues this tradition of excellence with modular porting, small
size and flexible configuration. Further details on how our experience and
expertise can help you with your needs and problems are below.
These high quality pumps are carefully
engineered and manufactured in a laboratory-like, clean production
environment. The result is a line of instrument-quality pumps that offer
unparalleled performance in terms of reliability and consistent operation
from cycle to cycle and pump to pump.
- Connects valves that set the world
standard
- Teflon®, PEEK and Kel-F wetted of
materials for maximum compatibility
- Suitable for time metered
micro-dispensing
- Superior valve to valve
connections
- Consistent performance for the
operating life
- Fast, consistent assembly time
- Operating pressures up to 200 psig
- 3 & 5 Port Manifolds available
- 10 colors available for easier
tracing
- All backed by our world-wide
network of degreed Sales Engineers
- All backed by our state-of-the-art
manufacturing facility
- All backed by a fifty-year Lee
Company heritage of quality, precision and service.
|
|
|
|
Precision Microhydraulics
Precision flow
restrictors, plugs, valves, and safety screens |
The Lee Precision MicroHydraulic
product groups design, build and supply fluid-control components to a wide
range of industries. Applications include hydraulic and pneumatic systems
in commercial and military aircraft, spacecraft, missiles, naval vessels,
machine tools, down-hole oil tools, power generation equipment, race cars
and more.
|
|
Industrial
Microhydraulics
Engineered plugs and
valves |
In 1991, The Lee Company
founded the Industrial MicroHydraulics (IMH) Division to adapt its
proven design concepts to meet the higher volume production, performance
and cost requirements of automotive and industrial hydraulic and medical
applications. Lee's IMH products have been well received. Using design
techniques similar to those used for the Lee Plugs, valves, restrictors
and safety screens that have logged millions of flight hours in
aerospace applications, The IMH Division can now offer products of the
same reliability and consistent performance, in very high quantities.
The Lee Company continues to expand the product offerings in The IMH
Division.
|
|
Custom Services for OEMs
|
The Lee Company can augment your
resources by acting as an extension of your in-house engineering. Lee
offers many special services to OEM customers including:
- Custom wire harnesses with electrical
connectors from suppliers like Molex and AMP and other harness needs
- Shielded lead wires
- Special dynamic performance testing
- Special flow and pressure tests
- Custom configurations and adaptations of
standard products
- Manifold/Valve design, integration,
fabrication and testing (turn-key)
- Custom voltage settings
- Custom Engineering / Design Services
- Custom Machined Parts for OEM
Applications
- Specialty Plastic Injection Molding of
Custom Parts for OEM Applications
|
|
Orifice, Flow Tube, Flow Restrictor
|
Valves: Dispensing, Metering, Brass, Steel
|
|
Plugs, High Pressure, Expansion Pipe Plug
|
Valves: Instrumentation Miniature Brass, Steel
|
|
Pumps: Miniature, Liquid, Electric
|
Valves: Pressure Relief, Miniature Brass Steel, Industrial
|
|
Valves, Hydraulic Aerospace
|
Valves: Solenoid Microminiature
|
|
Valves: Check Valves, Miniature Brass Steel, Stainless Steel
|
|
|
