The Series 302 is a 3 Way, 15 mm wide, manifold mount solenoid valve designed to control the flow of air or inert gases to small cylinders or actuators. The Series 302 offers the following benefits:

• Compact 15 mm, manifold design saves space and reduces assembly time.

• Low power consumption (0.5W).

• Built-in LED for indication of electrical operation.

• Built-in surge suppression to protect sensitive equipment.

• Manual operator for testing and troubleshooting.

Electrical:

• Standard Voltage:5, 12, 24, 48- VDC +10%, -15% (Leaded version availble in 24 VDC only. AC voltages available upon request)

• Power Consumption: 0.5, 1.0, 2.0 Watts (Nominal ratings without LED and surge suppression. Add 0.15W for versions with LED and surge suppression)

• Duty Cycle Rating: Continuous

• Coil Insulation: Class F

• Ambient Temperature: See ambient temperature table.

• Electrical Connection: AMP 2.8 x 0.5 with 9.4 mm spacing ISO 15217/DIN 43650C. 12" Lead wires

• DIN Connector: Size 9.4 mm, Form C (supplied with valve)

• Protection Rating: IP65 with DIN Plug Connector

Valve:

• Fluid Temperature 0.5 & 2.0 Watt Coil, 1.0 Watt Coil: 14° F to 104° F (-10° C to 40° C), -13° F to 104° F (-25° C to 40° C)

• Suitable Media: Air or inert gases filtered at 50µm, lubricated or not lubricated

• Response Time: 8 - 15 ms open or close

• Manifold Mounting: CNOMO, 15 mm wide

• Manual Operator:  Momentary – push in and hold, Maintained – screw type

• Body: IXEF (polyarylamide)

• Seals: NBR, FKM

• Internal Solenoid Components: POM, PET, stainless steel, brass

• Manifold Interface Seal: Hytrel

Ambient Temperature Ratings: 

• 0.5 W, Standard Version: 14° F to 122° F

• 0.65 W, LED/Surge Version: 14° F to 122° F

• 1.0 W, Standard Version: -13° F to 140° F

• 1.15 W, LED/Surge Version: -13° F to 140° F

• 2.0 W, Standard Version: 14° F to 122° F

• 2.15 W, LED/Surge Version: 14° F to 104° F