Global Business Directory

Search for: Products & Services Company Name
 
 


TASI Group - AW Lake Monitor, KEM Kueppers - Positive Displacement Flow Meter Mass Coriolis Company Profile
TASI Group - AW Lake Monitor, KEM Kueppers - Positive Displacement Flow Meter Mass Coriolis
Private Ownership
8809 Industrial Dr
Franksville, WI 53126 USA

Phone: 262.884.9800
Fax: 262.884.9810

www.awcompany.com

Spur Gear, Positive Displacement Flow Meters, JV-KL Series
The JV-KL Series represents a positive displacement meter that is affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. This reliability, coupled with a large turndown range, offers an affordable replacement for older turbine technology. The meter's solid construction and excellent dynamic response are well suited to the measurement of oil, grease, fuel, solvents, polyurethanes, brake fluid, skydrol as well as other nonabrasive lubricating fluids. Since there is no need for straight run piping upstream or downstream of the flow meter, the JV-KL flow meters are simple to use and to install. The meters produce good resolution and high accuracy at low flow rates. Flow may be bidirectional without damage to internal parts. Non-intrusive sensors, panel displays and electronic modules can be added to complete this superior value package.

 

Specifications

  • Flow ranges 0.003 to 120.0 GPM

  • Five Flow Ranges available

  • Accuracy ± 0.5% of reading

  • Aluminium, 303 and 316 SS bodies

  • Pressure rating up to 5000 PSI

  • Optional 14,000 PSI for JV(M/S)-10KL & JVM-20KL

  • Pulse, mA and Voltage Sensors available

  • Economical cost

  • Bi-Directional flow capabilities

 

Technical Data

  • Body Material: JVA - High Strength Aluminum, JVM - 303 Stainless Steel, JVS - 316 Stainless Steel

  • Gear Material: 17-4PH SS

  • O-Ring Material: Teflon / Viton optional

  • Bearings Material: 440 Stainless Steel

  • Accuracy: ± 0.5% over 10:1 Turndown with 30 cP Fluid

  • Repeatability: ± 0.1%

  • Temperature: Meter 300° F Aluminum Body, Meter 400° F Stainless Body

Sensor Models Sensor Type Sensor Features
DH-XX Dual Sensor with X2 Resolution Square wave frequency or Quadrature Output
MAG-EX Explosion Proof Sensor Pulse output, with conduit connection
FIP- XXX Meter Mounted Analog Output Sensor 3 wire, 4-20 mA, or Voltage analog output
CAPM-2 Single Sensor - standard Frequency output
CAPM-15 High Temp Sensor to 400 F for Stainless Steel Separated pickup & amplifier module
HEF-15 High Temp Sensor to 290 F for Aluminum Separated pickup & amplifier module
HALL-82 or 86 High Resolution Hall Effect Sensor X8 frequency - 20 KL & 60 KL
QUAD-80 High Resolution Hall Effect Sensor X4 frequency incl. Quadrature - 80 KL & 90 KL

Customize your results in the table below... Reset Table
Filter Products : Sort Products :
      Pressure Rating (psi ) 
      Filtration (um ) 
      Diameter (In ) 
      Flow Range (G/min ) 
      Impluses (G/min ) 
      Impluses (cc ) 
      HGT (In ) 
      Body Material  
      Ports  
      First by     
      Then by     
   

Showing 1 through 15 of 15 items
Stock #
Pressure Rating
(psi )
Filtration
(um )
Diameter
(In )
Flow Range
(G/min )
Impluses
(G/min )
Impluses
(cc )
HGT
(In )
Body Material
Ports
JVA - 10KL 3,000 30 2.0 0.003 - 0.5 90,000 20.8 1.5 High Strength Aluminum 1/4" NPT
JVM - 10KL 5,000 30 2.0 0.003 - 0.5 90,000 20.8 1.5 303 Stainless Steel 1/4" NPT
JVS - 10KL 5,000 30 2.0 0.003 - 0.5 90,000 20.8 1.5 316 Stainless Steel 1/4" NPT
JVA - 20KL 5,000 30 2.5 0.01 - 2.0 13,900 3.67 2.3 High Strength Aluminum 1/4" NPT
JVM - 20KL 5,000 30 2.5 0.01 - 2.0 13,900 3.67 2.3 303 Stainless Steel 1/4" NPT
JVS - 20KL 5,000 30 2.5 0.01 - 2.0 13,900 3.67 2.3 316 Stainless Steel 1/4" NPT
JVA - 60KL 5,000 50 4.5 0.05 - 20 1,850 0.49 3.0 High Strength Aluminum 1/2" NPT
JVM - 60KL 5,000 50 4.5 0.05 - 20 1,850 0.49 3.0 303 Stainless Steel 1/2" NPT
JVS - 60KL 5,000 50 4.5 0.05 - 20 1,850 0.49 3.0 316 Stainless Steel 1/2" NPT
JVA - 80KL 5,000 200 8.4 0.5 - 60 1,630 0.43 5.5 High Strength Aluminum 1 - 1/4" NPT
JVM - 80KL 5,000 200 8.4 0.5 - 60 1,630 0.43 5.5 303 Stainless Steel 1 - 1/4" NPT
JVS - 80KL 5,000 200 8.4 0.5 - 60 1,630 0.43 5.5 316 Stainless Steel 1 - 1/4" NPT
JVA - 90KL 5,000 200 8.4 1.0 - 120 870 0.23 7.0 High Strength Aluminum 1 - 1/4" NPT
JVM - 90KL 5,000 200 8.4 1.0 - 120 870 0.23 7.0 303 Stainless Steel 1 - 1/4" NPT
JVS - 90KL 5,000 200 8.4 1.0 - 120 870 0.23 7.0 316 Stainless Steel 1 - 1/4" NPT