| |
|
Company Profile
TASI Group - AW Lake Monitor, KEM Kueppers - Positive Displacement Flow Meter Mass Coriolis
Private Ownership
8809 Industrial Dr
Franksville, WI 53126 USA
Phone: 262.884.9800
Fax: 262.884.9810
www.awcompany.com
|
| Positive Displacement Flow Meters, JVM Series |
 |
The JVM Series flow meters are
economical and reliable positive displacement flow meters suitable for a
wide variety of paints and industrial fluids. The principal of operation
is that of a gear pump, but in reverse; instead of the gears driving the
medium, the medium drives the gears. A non-intrusive sensor detects the
movement of the gears and produces a square wave pulse for each gear
tooth. The resulting pulse train is proportional to the actual flow rate
and provides a highly accurate representation of the fluid flow. The
body and gears are manufactured from stainless steel with tungsten carbide
shafts and tungsten carbide bearings. The JVM meters are recommended for
non-lubricating fluids such as paints, adhesives, sealants and resins.
Sensors available include frequency output, analog output, fiber optic and
intrinsically safe models.
|
|
Specifications
Accuracy ± 0.5% of reading
303 and 316 SS bodies
Pressure rating up to 5000
PSI
Pulse, mA
and Voltage Sensors available
Economical cost
Bi-Directional
flow capabilities
|
Technical Data
-
Body Material: JVM-303 SS, JVS-316
SS
-
Gear Material: 17-4PH SS/1.4122
-
O-Ring Material: Teflon /
Viton optional
-
Bearings Material:
Tungsten Carbide
-
Shaft Material: Tungsten
Carbide
-
Accuracy: ± 0.5% over
10:1 Turndown with 30 cP Fluid
-
Repeatability: ± 0.1%
-
Temperature: 180° C/ 400° F
-
Porting: BSP includes NPT
adapter
|
|
| Sensor Model |
Sensor Type |
Sensor Features |
| HEF-1 or CAPM-2 |
Single Sensor - standard |
Frequency output |
| MAG-EX |
Explosion Proof Sensor |
Pulse output, with conduit connection |
| FIP- XXX |
Meter Mounted Analog Output Sensor |
3 wire, 4-20 mA, or Voltage analog output |
| CAPM-15 |
High Temp Sensor to 400 F for Stainless
Steel |
Separated pickup & amplifier module |
| CAPM-2o |
Single Sensor - UL Approved |
Intrisically safe - frequency output |
| DH-20 |
Dual Sensor with X2 resolution |
Frequency or quadrature output |
| FOP-20 or 30 |
Fiber Optic Sensor |
Frequency or quadrature output |
|
|
